The Echolo Developer Hub

Welcome to the Echolo developer hub. You'll find comprehensive guides and documentation to help you start working with Echolo's IoT Platform as quickly as possible, as well as support if you get stuck. Let's jump right in!

Get Started    

OLR - Wifi Setup

1. Power On

1.1 First, unbox and plug the OLR into a power source using the UBS and AC adaptor included with the unit.

2. Connect

2.1 Using your phone or computer, connect to the Hub's wifi (blegw_XXXXXXXXXXX), the password will be the Hub key.

Get the Hub 'key'

You may access the Hub key in the Echolo IoT Dashboard.

3. Login

3.1 Once connected via wifi to the Hub, you will need to point your browser to: ''

Special note

You may be prompted by your browser letting you know "Your connection is not private". This is because the Hub does not have an SSL Cert that your browser will recognize. Simply proceed to the login screen.

3.2 Login to the Hub admin page with:
username: root
password: {Hub Key}

4. Setup and connect to Wifi

4.1 Now that you are logged in, you can click on "Network". Once there you should change "Wan Mode" from "Ethernet" to "WLan". From here you can select a visible wifi network and enter your wifi password.

4.2 Click "Apply", the Hub will let you know it needs to reboot, click "OK" and then disconnect from the "blegw_XXXXXXXXXX" wifi.

You are now, finished and should see a flashing GREEN LED on the Hub. If you see a RED flashing LED then follow the steps above again. If you continue to have issues, please contact support for more help.

OLR - Wifi Setup

Suggested Edits are limited on API Reference Pages

You can only suggest edits to Markdown body content, but not to the API spec.